TaeguTec launches new products

Новости

Все новости

Korean cutting tool manufacturer TaeguTec has recently launched new products with promises that there will be new developments that will be launched at the upcoming EMO 2019 exhibition that takes place in Hannover, Germany in September 2019.

Chase2Mill line extended by TaeguTec
First introduced two years ago the TaeguTec Chase2Mill series of end mill tools is being extended with the arrival of two additional insert designations.

Suitable for ramp and slot milling applications, Chase2Mill is available in end mill, modular or face mill designations. Initially launched with a four-corner, double-sided 4NHT 06 insert range featuring a 90° entry angle that is suitable for high ramp-down applications, the 4NHT 06 has been expanded and a newly developed 4NHT insert series released.

The 4NHT 06 corner R range insert has been extended (04R-20R) to meet the wider range of corner radius requirements demanded by today’s industry. Adding to the existing 8mm and 16mm radius inserts, TaeguTec has expanded the line to include a 4, 12 and 20mm radius offering. The extended 4NHT 06 is available with TaeguTec’s ML and M geometry, and the TT8080 and TT9080 grades, which combine to improve cutting load, minimise built-up-edge and generate high surface finish, says the company.

TaeguTec’s 4NHT 06 insert designation has also been launched with the 4NHT 06-ML, which is said to be characterised by its ability to generate low cutting loads and high surface finishes (credit to ground cutting edges that minimise built-up-edge).

A further introduction is the 4NHT 06-AL series of uncoated inserts for aluminium and non-ferrous cutting applications.

First introduced two years ago the TaeguTec Chase2Mill series of end mill tools is being extended with the arrival of two additional insert designations

 

Expands StarMill SED end mill series
The StarMill SED range of end mills from TaeguTec has been expanded to offer a greater choice of diameters, lengths, radii, coatings and geometries.

Already available for use on difficult-to-cut materials such as stainless steel, titanium, Inconel and other high-temperature alloys, StarMill has been extended with the arrival of the SED4 UL range of 4-flute extra-reach end mills. The UL extension introduces end mills in 3, 4, 6, 8, 10 and 12mm diameters with an overall reach from 63mm to 92mm, depending upon the chosen diameter. With a flute length from 10mm to 40mm, this addition to the SED line-up enables manufacturers to access small cavities and difficult-to-reach surfaces.

In addition to the SED4 UL line, TaeguTec has also introduced a complete line of SED4 UR end mills with a corner radius for enhanced tool life and machining performance. The SED4 UL range is available in diameters from 2 to 16 mm with each diameter offering the customer a selection of corner radii. Although the 4 mm diameter tool offers users the choice of a 0.1, 0.2 or 0.5mm radius, the largest 16mm end mill is available with a 0.5, 1, 2 or 3mm corner radius.

All ranges within the SED StarMill portfolio incorporate unequal flute spacing and a high helix that combine to reduce harmonic effects and vibration during high-speed machining. Furthermore, the polished high-helix flutes improve chip evacuation, while the TT5515 grade coating prolongs tool life, even under challenging machining parameters, says TaeguTec.

The StarMill SED range of end mills from TaeguTec has been expanded to offer a greater choice of diameters, lengths, radii, coatings and geometry

 

Topdrill – New DL chip former for mild steel machining
The TopDrill line’s current DP chip former is a multi-purpose insert that works wonders on various types of materials. Now TaeguTec has expanded the line’s capabilities by introducing the DL chip former specifically dedicated for mild steel machining applications.

The DL chip former


The TT7025 grade – has been introduced to widen the scope in order to focus on low speed and interrupted cast iron machining

 

The product line already includes several types dedicated to various materials: The DP for general purposes; The DK for cast iron, as well as the DA for aluminium machining. With the introduction of the DL insert for mild steel machining, customers now have a wider range of chip former options across more material types.

DL chip former features
The DL chip former is suitable for mild steel and low carbon steel machining due to its improved chip segmenting capability and the application range has been expanded.

TaeguTec has been supplying both the TT7005 and TT7015 grades for cast iron machining with great success. Now, an additional grade – the TT7025 grade – has been introduced to widen the scope in order to focus on low speed and interrupted cast iron machining.

TaeguTec has also recently released Chase2Hepta, new carbide shim type cutters and inserts XNM(H)U 06 for reliable roughing and finishing of difficult-to-cut materials

T-Turn – TaeguTec’s new grades and chip breakers for heat resistant super alloys

The new grade has improved abrasion and chipping resistance because of the latest substrates and coatings ensuring excellent performance, stable and longer tool life in low speed and interrupted machining of cast iron. A further advantage of the new grade is it capitalises on recent trends due to its suitability for ductile cast iron machining. Very good surface roughness is achieved due to the GoldRush post-treatment technology. The TT7025 grade’s black and yellow appearance, black on the bottom and top faces and yellow on the sides, helps to easily determine the level of wear to the insert.

For more information contact TaeguTec SA on TEL: 011 362 1500 or visit www.taegutec.com

 

Рекламодатели

Партнёры

Новостная рассылка

Будьте в курсе наших последних новостей. Оформите бесплатно персональную новостную рассылку.