The times, that we are living in, can help the change also in the woodworking sector. During May 2020 It will officially initiate the new SALVAMAC GROUP project.
“Heraclitus, Panta rhei, everything is becoming, everything flows, everything changes. It is not possible to swim twice in the same river and this time the water flows strong, impetuous, drags everything away.” Christian Salvador, founder of Salvamac, says analysing the consequences of the Coronavirus can create on woodworking sector: Internet access will grow exponentially, much more than what has been seen so far and this could favour smaller but more dynamic realities. The market is the meeting place between offer and demand and for the offer it can be a great opportunity to overcome the problems of “information asymmetry” and be seen in places where it would never have gone before. The barriers to entry could go down and give new stimulus and energy to those who want to bring change, the new adventure. We as Salvamac believe in this new era, starting right from our Slogan: #bethechange”.
Ziemowit Dolkowski co-founder of Salvamac says “During the month of May 2020 we want not only to confirm our choices, share our ideas with our partners as we have done in the past and how we will do in the future but also to kick off our new Salvamac Group project. Something greater, a reality that has its roots in our tradition, passion and in the conviction that there are people and interpersonal relations behind all this. Our growth has been greater than 50% in the last year and it was a success that we really did not expect! A success that has not only concerned traditional and already consolidated products but the entire production range and which has led us to the creation of something greater: Salvamac Group.”.
SALVAMAC continues to move forward in its social and ethical approach to production, innovation by creating a true and relevant group that is based on the support of 4 production units in 3 different countries to obtain a winning mix of Italian heads and heart with dynamics, advantages and the competences of national realities in strong evolution
In this perspective, the Salvamac Group multiplies itself exponentially in 3 departments.
The Cross-cutting part specialized in the cutting and optimization of wood, the Air&Painting department where the suction, air filtration, the wood painting systems find the reference point and finally the brand new Salvamac Selection, a real innovation that will be the great natural evolution of the Salvamac project.
SALVAMAC CROSS-CUTTING: CUTTING WITH 3 S: SOLID, SIMPLE, SAFE
A consistent catalog focusing on automatic cutting lines, but also on semi-automatic cutters equipped with devices that make them real cutting centers. The leader product of the Salvamac optimizers, the SalvaPush_2000 pusher optimizing saw is presented with a brand new version of software that allows anyone to manage it simply and completely like a smartphone, with website graphics and all the practicality for setting data of a large touch screen, in digital communication among all electronic components. Not only that, the recent developments in bar-code data import and the relative “just in time” management systems (from the development of the customer's order to the finished product) make it a unique solution on the market for production processes even in single batches. Very flexible and cutting-edge technical solutions make it possible to communicate both upstream and downstream with company software management, thus creating fundamental principles of industry 4.0.
The new exclusive mechanical solutions are also present for both the cutting system and the pusher system, solutions that are showing all their potential and flexibility at the customers’ places where the machines work. The applications of the machines in the sector of sofas and special pallets fully confirm the recent developments.
The cutting range is also complemented by the Classic cutting saws characterized by the 3S of Salvamac philosophy: Solid, Simple and Safe
Solid because they are designed and made to work even in difficult conditions and of heavy wood. The structure is completely made of hard painted steel, very thick and very resistant. Safe thanks to the two-hand safety control in an ergonomic position and the blade protection cover that allows to work in absolute safety. Simple because the ease of use is increased by the new successful SalvaStop_100 device, the evolution of the numerical control length positioning and stop system. It is the real solution to save labor costs, waste of productivity and decrease human errors and finally forget to use the tape measure.
Ziemowit Dolkowski continues: "We have worked hard to create the exclusive software, very easy to use thanks to an immediately understandable and effective, complete, powerful and flexible graphics. It includes 5 different sections and 2 different modes. "STOP" or "PUSH". Also using a 7 "s-PAD touch screen, in an excellent position for reading and programming, not forgetting the included and installed Internet tele-service software." "Salvastop" can be installed on the "Classic 40", "Classic 50" and "Classic 60" models, substantially transforming the "entry level" models into real semi-automatic cutting centers, made even more interesting by the possibility of interfacing them with the management software already available in the company.
Thanks to the entry of Salvamac into a reality present on the market for over thirty years, always oriented towards high quality products, we are already conquering positions on various markets, with an offer that - remaining faithful to the Salvamac philosophy - ranges from painting booths, equipped with innovative sandwich panels to provide greater resistance and devices that significantly reduce consumption, to the "do it clean" sanding benches.
In addition to the "Painting" department, which includes perfect solutions for companies of different sizes and needs, Salvamac is able to offer ultra-robust and efficient portable vacuum cleaners, bag filters or cartridges, as well as complete customized systems.
This is the mission of the "Air" department, all with the clear intention of exploiting the great potential of the Internet with more traditional sales and assistance systems, always focusing on what the customer really needs.
In particular, the most recent projects and products confirm Salvamac success also in the aspiration systems especially about the high-tech mobile aspirators of the "SuperDep" series.
These special collectors are designed and manufactured using the highest technologies. They are very versatile filter groups, which take up little space, suitable for indoor and outdoor use, extremely functional in the extraction of dust and wood chips.
The fan is positioned in such a way as to obtain a negative pressure which prevents the escape of dust in the event of a leak.
The automatic compressed air cleaning system makes them the right ally for those working in the industrial sector of woodworking.
All models achieve a residual dust content of less than 0.1 mg./mc. and comply with the residual dust level H3.
SALVAMAC SELECTION: THE CHANGE!
The new project has seen the creation of the third department, the SALVAMAC SELECTION: a selection of different products with the same culture and philosophy that distinguish the company as an international company
A real novelty that the creator Christian Salvador defines as a real revolution in the market approach “ Unlike others, I have always believed in the importance of union, of aggregating and I think that today there is an opportunity for a change with strong and positive effects also in the immediate future! Our network and its strength will allow us to introduce new products for the solid wood industry every month, high-quality machines, as in our history, but at a price that allows more companies to choose the technological path. The strategy is clear: to optimize the process and use every possible "country advantage" to produce machines with the highest quality and affordable prices for the customer: this is the reason for choosing the "Salvamac" brand: machines that are simple to use and with which it is easier to cut costs and increase profits. A true network creation that gives the missing added value to our customers and to the whole wood industry. We are ready for the new challenge"
ul. Modrzewiowa 18, 62-081 Przeźmierowo Poland
VAT: 7773261350 KRS: 0000623398
press contact:
Christian Salvador
MOB: +39 350 51 909 69
IDEAS FACTORY: VIA XX SETTEMBRE 105, 31015 CONEGLIANO (TV) ITALY
christian@salvamac.com
